 Click thumbnails to enlarge. The training video requires
that you have Flash 6 or later installed. If you do not have Flash 6, you
may install it by clicking the Adobe Flash Player Link to
the right.
QVS Training Part
This is the QVS training part, used for the
presentation and training classes. In order to run a
stored part program, the
part needs to be "located" as it was originally programmed,
but not necessarily in the same spot. A setup screen prompts the
operator to position the lower left hole "under" the Circle
target and press X-Y to set zero. Focus on the top surface to set
Z to zero. Joystick the lower right hole and use the align button,
to set the X-axis alignment. Press Ok and the part program will run
automatically.
|
Basic-X Training video
If you have Flash 6 installed on your computer you may watch
the Basic-X
Training video, or if not, you may download it by here Windows
(1,116 kb) Mac (1,363 kb) and
watch it anytime. If you would like to get the latest Flash plugin use the link
below. |
Part location for program Run
Use the Target-Circle function, position the overlay
over the lower left hole and press X-Y to set datum to 0,0. |
|
Focus function
Select a high magnification, and use the AutoFocus
function to detect a Z point and press Z to set Z datum to 0. |
Skew alignment
Use the Target-Circle function and position the
overlay over the lower right hole and press Align, for the new
X axis.
|
Feature Finder - Circle
Pick three points on a circle, for a automatic
circle measurement.
|
Feature Finder - Arc
Pick three points of an arc, for a automatic
arc measurement.
|
Edge Trace
Start point, direction and end point to trace
the entire perimeter of a part.
|
Feature Finder - Line
Click and drag mouse along edge for a automatic
line measurement.
|
Copy Function - Lines
Use multiple 'lines" to construct other
features, ie: slots.
|
Model Window
Use existing features to construct other types
of features (slots, circles, intersections, datums, etc.).
|
Simple listing
Short format of program steps.
|
Expanded program listing
Detailed listing of program format and features.
|
